Product ID:2-TON CLEAR EPOXY RESIN, 71722
MSDS Date:02/08/1990
FSC:8040
NIIN:00N021815
Kit Part:Y
MSDS Number: BLRYY

Emergency Phone: 708-296-6111

Info Phone: 708-296-6111

Cage: DO397

Telephone: 708-296-6111

Cage: DO397

EPOXY RESIN; (BISPHENOL A DIGLYCIDYL ETHER RESIN)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 60%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE SENSITIZATION WITH ITCHING, SWELLING OR RASHES ON LATER
EXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MILD IRRITATION TO EYES AND SKIN. THERE IS NO
DATA REGARDING INHALATION, HOWEVER, THE LOW VAPOR PRESSURE OF THE
RESIN MAKES INHALATION UNLIKELY IN NORMAL USE. ACUTE ORAL TOXICITY
IS LOW. MAY CAUSE GAS TRIC DISTRESS.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA, OR OTHER SKIN
DISORDERS.

First Aid:EYE:FLUSH W/CLEAN WATER FOR AT LEAST 15 MIN WHILE GENTLY
HOLDING LIDS OPEN. GET MD IMMED. SKIN:WASH THOROUGHLY W/SOAP &
WATER. CALL MD IF IRRIT DEVELOPS. INHAL:REMOVE TO FRESH AIR. GIVE
O2 IF BRTHG DF CLT. GET MD IF SYMPTOMS PERSIST. INGEST:DO NOT
INDUCE VOMITING. GIVE 2 GLASSES OF WATER TO DILUTE (UNLESS UNCON).
GET MD.

Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:PREVENT SKIN AND EYE CONTACT. LARGE SPILLS MAY
BE ABSORBED ON INERT MATERIAL SUCH AS SAND OR VERMICULITE. SCRAPE
SPILL UP INTO NONPOROUS CONTAINERS. CLEAN SPILL AREA W/STRONG
DETERGENT AND WATER. USE SOLVENTS ONLY WITH APPROPRIATE CAUTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. HANDLE MIXED
RESIN & HARDENER I/A/W POTENTIAL HAZARD OF CURING AGENT USED.
Other Precautions:REMOVE CONTAMINATED CLOTHING AND PROTECTIVE GEAR;
CLEAN THOROUGHLY BEFORE USING AGAIN. DISCARD CONTAMINATED LEATHER
ARTICLES. HEAT IS GENERATED WHEN RESIN IS MIXED W/AMINES/EPOXY
HARDENERS. BE CAREFUL WHEN MIXING LARGE AMOUNTS.

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:LOCAL EXHAUST RECOMMENDED FOR CONFINED AREAS. MECHANICAL
(GENERAL) ADEQUATE FOR NORMAL USE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:OTHER GEAR AS REQUIRED TO PREVENT SKIN
CONTACT.
Work Hygienic Practices:USE AS DIRECTED ON PRODUCT LABEL AND PRACTICE
GOOD HABITS OF CLEANLINESS. WASH THOROUGHLY AFTER USING, (SUPP
DATA)
Supplemental Safety and Health
HYGIENE PRACT:PARTICULARLY BEFORE EATING OR SMOKING.

HCC:N1
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:1.2
pH:7
Evaporation Rate & Reference:<1 (BUTYL ACETATE = 1)
Solubility in Water:NIL
Appearance and Odor:THICK, AMBER LIQUID WITH LITTLE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:OPEN FLAME AND EXTREME HEAT.
Hazardous Decomposition Products:COX, ALDEHYDES AND ACIDS FROM
INCOMPLETE COMBUSTION.

Waste Disposal Methods:REMOVE TO A WASTE FACILITY OPERATING IN
COMPLIANCE WITH STATE AND LOCAL REGULATIONS. DISPOSE OF I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.